IPX DDK-1000 Installation & Operation Manual Download Page 12

Page: 12 / 106

2.4 The USB function

By connecting the Ipxcam with a PC via the USB connector, the Ipxcam can provide two different

functions.

1. Insert an SD card: As a card reader.

Insert an SD card into the Ipxcam, then connect to the PC. You might transfer files between

the SD card and the PC. Once you've connected your Ipxcam to your computer, the Windows

system will detect the connection and ask you what you want to do with your SD card.

In another words, if the user connects the Ipxcam with an SD card and the PC via the USB

connector, the Ipxcam can be used as a normal card reader.

2. Remove an SD card: As a configuring tool.

Before using the USB configuration setting page, please remember to remove the SD card or

your PC will read the SD card and won’t show this window.

Network

Setting

PPPoE

Setting

DHCP ON

DHCP OFF

WARNING: After changing the settings, please click the “Apply” button. All of the

options will be effective after removing the USB connector.

Summary of Contents for DDK-1000











































































































Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands

IPX DDK-1000, Installation & Operation Manual

Search results

Summary of Contents for DDK-1000

Reviews:

Related manuals for DDK-1000

Brands by name

Popular brands