manualshive.com logo in svg

Invitrogen iBlot 2, User Manual

Share
Download
Invitrogen iBlot 2 User Manual Download Page 66

Documentation and support

Customer and technical support

Visit thermofisher.com/support for the latest service and support information.

• Worldwide contact telephone numbers
• Product support information

– Product FAQs
– Software, patches, and updates
– Training for many applications and instruments

• Order and web support
• Product documentation

– User guides, manuals, and protocols
– Certificates of Analysis
– Safety Data Sheets (SDSs; also known as MSDSs)

Note: 

For SDSs for reagents and chemicals from other manufacturers,

contact the manufacturer.

Limited product warranty

Life Technologies Corporation and/or its affiliate(s) warrant their products as set forth

in the Life Technologies' General Terms and Conditions of Sale at 

www.thermofisher.com/us/en/home/global/terms-and-conditions.html. If you have

any questions, please contact Life Technologies at www.thermofisher.com/support.

H

66

iBlot

™

 2 Dry Blotting System User Guide

Summary of Contents for iBlot 2





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands