5.
Wipe down instrument and metal contacts with a damp cloth or paper tissue to
remove any excess liquid that may have not been absorbed by the iBlot
™
2
Absorbent Pad.
6.
At this point, the iBlot
™
2 Gel Transfer Device is ready for another run (no
cooling period is required). If you are not using the device, turn off the power
switch located on the back of the iBlot
™
2 Gel Transfer Device.
IMPORTANT!
Do not reuse the iBlot
™
2 Absorbent Pad, iBlot
™
Filter Paper, or
Top and Bottom Stacks after blotting. Discard after each use.
Chapter 2
Protein transfer protocol
Disassembling the iBlot
™
2 Transfer Stack
2
iBlot
™
2 Dry Blotting System User Guide
35
