Operating the iBlot
™
2 Gel Transfer Device
The first time the iBlot
™
2 Gel Transfer Device is turned on, you will need to perform
the following actions:
1.
Configure the clock by touching the appropriate fields and entering the values.
Touch Enter when done. Then Touch Done on the Date & Time screen.
2.
The Tutorial screen is displayed. Take the tutorial if desired (the tutorial guides
the user to assemble a stack and allows you to run the P0 Method if a stack is in
the device. Otherwise hit Cancel to go to the Home Screen).
3.
OR skip the tutorial to go to the Home Screen.
The control panel is a touch screen display allowing:
1.
Running the Method that was last used on the device
Note:
This icon will not appear until after the first time the function is used.
2.
Running Preset Templates (Default Methods)
3.
Programming Custom Methods
Note:
For details on creating Methods, refer to “Creating custom methods“ on
page 36.
4.
Running Custom Methods
Note:
This icon will not appear until after the first time the function is used.
First time usage
of the iBlot
™
2 Gel
Transfer Device
Control panel of
the iBlot
™
2 Gel
Transfer Device
Chapter 1
Product information
Operating the iBlot
™
2 Gel Transfer Device
1
18
iBlot
™
2 Dry Blotting System User Guide
