Intesis
Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of
Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
13 / 31
9:
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Control_ Mode
objects for Auto, Heat, Cool, Fan and Dry will appear. To
activate a mode by using these objects a
“1”
value has to be sent.
4.2.5
Enable use of bit-type Mode objects (for status)
This parameter shows/hides the bit-type
Status_ Mode
objects.
28:
29:
30:
31:
32:
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the
Status_ Mode
objects for Auto, Heat, Cool, Fan and Dry will appear.
When enabled, a mode will return a
“1”
through its bit-type object.
4.2.6
Enable use of Text object for Mode
This parameter shows/hides the
Status_ Mode Text
communication object.
33:
o
If set to
“no”
the object will not be shown.
o
If set to
“yes”
the
Status_ Mode Text
object will appear. Also, in the parameters, will be
shown five text fields, one for each mode, that will let modify the text string displayed by
the
Status_ Mode Text
when changing mode.
Figure 4.12
Parameter detail
