IntesisBox HA-AC-KNX-16, User Manual

Page: 31 / 31

Intesis Box
®
KNX - Haier A.C. (VRF line)
User's manual r1.0 EN
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
URL
Email
tel http://www.intesisbox.com
info@intesisbox.com
+34 938047134
31 / 31
36 Status_ Fan Speed 1 1 bit DPT_Bool 1.002 R T 1 - Speed 1
37 Status_ Fan Speed 2 1 bit DPT_Bool 1.002 R T 1 - Speed 2
38 Status_ Fan Speed 3 1 bit DPT_Bool 1.002 R T 1 - Speed 3
39 Status_ Fan Speed Text 14 byte DPT_String_8859_1 16.001 R T ASCII String
Temperature
40 Status_ AC Setpoint Temp 2 byte DPT_Value_Temp 9.001 R T 16ºC to 32ºC
41 Status_ AC Ambient Ref Temp 2 byte DPT_Value_Temp 9.001 R T ºC value in EIS5 format
Error
42 Status_ Error/Alarm 1 bit DTP_Alarm 1.005 R T 0 - No Alarm; 1 - Alarm
43 Status_ Error Code 2 byte Enumerated R T 0 - No Error; Any other see user's manual
44 Status_ Error Text code 14 byte DPT_String_8859_1 16.001 R T 2 char Haier Error; Empty - none
Control Mode
45 Control_ Control Mode No Central 1 bit DPT_Bool 1.002 W T 1 – No Central Controller
46 Control_ Control Mode LIFO 1 bit DPT_Bool 1.002 W T 1 – Last Input First Output (LIFO)
47 Control_ Control Mode Central 1 bit DPT_Bool 1.002 W T 1 – Central Controller
48 Control_ Control Mode Lock 1 bit DPT_Bool 1.002 W T 1 – Lock Central Controller
NOTE: This addressing corresponds to the first AC indoor unit of the configuration. Communication objects for the rest of AC units are
consecutively listed.