Chapter 2: Installation
TruVision PTZ 36X Camera User Manual
5
Chapter 2
Installation
This chapter provides information on how to install the dome camera.
Use a control keypad or device, such as the Interlogix KTD-405/KTD-405-2D
keypad, to control the dome camera.
Installation environment
When installing your product, consider these factors:
•
Handling
: Handle the camera carefully. Avoid striking, shaking, etc. Improper
handing or storage could damage the camera.
•
Electrical
: Install electrical wiring carefully. It should be done by qualified
service personnel. The input electricity to the unit has a tolerance of 24 VAC
± 10%. Do not overload the power cord or adapter.
•
Ventilation
: Ensure that the location planned for the installation of the
camera is well ventilated.
•
Temperature
: Do not operate the camera beyond the specified temperature,
humidity or power source ratings. The operating temperature of the indoor
camera is 0°C to 40°C (32°F to 104°F) and that of the outdoor camera is -
40°C to 50°C (-40°F to 122°F). Maximum operating humidity is 90%.
•
Moisture
: Do not expose the indoor camera to rain or moisture, or try to
operate it in wet areas. The indoor camera is designed for indoor use or
locations only where it is protected from rain and moisture. Turn the power off
immediately if the camera is wet and ask a qualified service person for
servicing. Moisture can damage the camera and also create the danger of
electric shock.
•
Cleaning
: Clean only with a dry cloth. If the dirt is difficult to remove, use a
mild liquid non-abrasive detergent and wipe gently.
Summary of Contents for TruVision PTZ 36X
