Chapter 5: Advanced setup
52
TruVision PTZ 36X Camera User Manual
Alarm settings
You can program actions for alarms. The camera has four alarm inputs and two
alarm outputs (NO and NC) to which to connect alarm devices.
Figure 24: Alarm setting menu
Table 23: Alarm setting menu description
Function Description
ALARM PIN
Select an alarm connector, and then set its alarm-related
parameters in the Alarm Setting menu.
ALARM SWITCH
Enable or disable the selected alarm pin function.
ALARM TYPE
Select the contact type (NO, NC).
Normally Open (NO):
Alarm
In
Normally Closed (NC):
Alarm
In
ALARM ACTION
Select one of the pre-programmed modes to be executed
when the alarm is triggered (Preset, Sequence, Autopan, or
Cruise.) The option listed below will depend on which mode
has been selected.
When an alarm is triggered, there will also be a warning
flashed on-screen. See Figure 1 on page 30.
PRESET POINT
Select a pre-programmed preset number that the camera
should execute when an alarm contact is triggered.
ALARM SETTING
ALARM
PIN
1
ALARM
SWITCH
OFF
ALARM
TYPE N.C.
ALARM
ACTION
PRESET
PRESET
POINT
001
DWELL
TIME ALWAYS
ALARM PRIORITY 1
EXIT
YES
Summary of Contents for TruVision PTZ 36X
