Chapter 2: Installation
20
TruVision PTZ 36X Camera User Manual
To mount the dome camera on a ceiling:
Caution:
For safety reasons the dome camera must be properly anchored to the
ceiling structure. It is important to ensure that a dome camera cannot be pulled
through ceiling tiles on which it is mounted.
It is recommended to mount the dome camera to an electrical box and not
directly to ceiling tiles. The electrical box must be properly anchored.
1. Place the hard ceiling mount in the desired position on the ceiling and mark
the position of the three screw holes.
2. Drill a hole in each marked position, slightly smaller than supplied screw
anchors.
3. Fix the hard ceiling mount to the ceiling
using the self-tapping screws, where
shown.
4. Thread all cables through the center hole
of the mount and connect the cables to the
base of dome camera.
5. Attach the dome camera to the hard
ceiling mount by turning the camera base
clockwise, from below (note that picture
here shows a counterclockwise direction,
because it is captured looking down from
above).
6. Tighten the screw at the side of the fixing
plate.
Summary of Contents for TruVision PTZ 36X
