![background image](http://html1.mh-extra.com/html/interlogix/truvision-ptz-36x/truvision-ptz-36x_user-manual_2077155054.webp)
Chapter 5: Advanced setup
50
TruVision PTZ 36X Camera User Manual
Function Description
the dome tilts to the maximum angle, it will pan 180°, and then
continue tilting to keep tracking objects.
Off:
Select this option to disable the image flip function. This is the
default setting.
Note
: To make the camera tilt within a specific range, such as
between -10° to +100°, set the range of tilt angle in the Angle
Adjuster menu (see next section). The default tilt setting is 90°.
ANGLE ADJUSTER
Use this setting to adjust the minimum and maximum camera viewing
angles.
The minimum angle can be adjusted between -10° and +10°. Default
value is 0°.
The maximum angle can be adjusted between 80° and 100°. Default
value is 90°.
PT POSITION
Use this setting to display the pan/tilt position on the screen.
SPEED BY ZOOM
Proportional speed.
Proportional speed decreases the pan/tilt speed of the camera to
provide better tracking when the camera is zoomed in. This helps
reduce pan/tilt overshoot when zooming in on objects far from the
camera.
AUTO CALI.
Auto calibration.
There are one horizontal and one vertical infrared ray check points in
each dome. When the camera’s position is moved during installation
or maintenance, the relative distance between the original set point
and the check point could be changed. Enable the Auto Calibration
function, the dome will automatically detect the distance change and
reset the point back to the original position.
PASSWORD
The camera is shipped without password protection. When this
function is enabled, you will be prompted to enter the password to
proceed whenever the OSD menus are accessed.
To set or change a password:
1.
For the password function, select On and press the
set
key. The
New Password screen appears.
2
. Using the arrow keys on the keypad or the jogging stick, select a
number from the list and press the
set
key to input. For example,
for password 0134, select:
For example: 0,
set
, 1,
set
,
3,
set
, 4,
set
Passwords must have four digits. The default password is 0000.
3
. In the Confirm Password line enter the same password again to
confirm the setting.
Summary of Contents for TruVision PTZ 36X
