![background image](http://html1.mh-extra.com/html/interlogix/truvision-ptz-36x/truvision-ptz-36x_user-manual_2077155014.webp)
Chapter 2: Installation
10
TruVision PTZ 36X Camera User Manual
DIP switches and connectors
Configure the dome camera’s ID and communication protocol before connecting
the analog dome camera to other devices. The DIP switches used for
configuring these settings are located on the top of the dome camera housing.
See Figure 4 below for the location of the DIP switches on both the indoor and
outdoor dome cameras.
Figure 4: Dome camera DIP switch location
Indoor dome camera
Outdoor dome camera
A. Alarm I/O
B. Dome camera site ID DIP switches
C. BNC Video Output
D. Communication switch setting
E. Camera protocol setting
F. RS-485 connector
G. 24VAC power connector
See the following sections on how to setup the ID and control protocol of the
dome camera.
Summary of Contents for TruVision PTZ 36X
