![background image](http://html1.mh-extra.com/html/interlogix/truvision-ptz-36x/truvision-ptz-36x_user-manual_2077155011.webp)
Chapter 2: Installation
TruVision PTZ 36X Camera User Manual
7
Figure 3: Outdoor dome camera contents
Dome camera, housing top cap, and
6” bubble
User manual
Security screws (X4):
M3 standard screw (x1)
M3 security screw (x1)
M5 standard screw (x1)
M5 security screw (x1)
Waterproof top cap boot
Security TORX wrench
Container of gasket lubricant (not
shown)
3-pin 24 VAC power connector
(not shown)
5-pin RS-485 connector
(not shown)
Removing the protective shipping materials
The outdoor dome camera is shipped with a protective tape and PE sheet on the
dome camera for protection. These must be removed before installation.
To remove the shipping materials:
1. Unpack the dome camera.
2. Remove the bubble assembly from the dome
housing by placing your hands on the plastic
ring and pushing up (away from the dome
housing) on the bubble assembly. The bubble
assembly is only held in place by compression,
due to the gasket.
Summary of Contents for TruVision PTZ 36X
