FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
Contents
•
Weatherproof IR camera
•
Mounting screws x 4 / 2 x Allen key
•
Mounting template x 1
•
60ft BNC / power extension cable
•
BNC female / RCA male adapter
•
Power adapter
255mm / 10.1”
Copyright © 2012 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE
Camera Specifications
Image Sensor
1/3” Sony Exview HAD™ CCD II
Video Format
NTSC
Effective Pixels
H: 976 V: 494
Resolution
up to 700 TV Lines
Scan System
2:1 Interlace
Sync System
Internal
S / N Ratio
+50dB (AGC Off)
Iris
AES
AES Shutter Speed
1/60 ~ 1/100,000 sec.
Min. Illumination
0.15 Lux without IR LED
0 Lux with IR LED
Video Output
Composite 1.0Vpp @ 75ohm
Lens / Lens Type
6mm F1.6 / Fixed
FOV (Diagonal)
53°
Termination
BNC Type
IR LED Qty. / Type
42 pieces / 850nm
Night Vision Range*
120ft (37m) / 180ft (55m)
Power Requirement
12V DC ±10%
Power Consumption
Max. 420mA (w / IR)
Operating Temp. Range
14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range
< 80% RH
Environmental Rating**
IP66
Weight (including stand)
1.7lbs / 0.8kg
*Stated IR illumination range is based on ideal conditions in total darkness and in typical outdoor
night time ambient lighting. Actual range and image clarity depends on installation location, viewing
area and light reflection / absorption level of object.
** Not intended for submersion in water. Installation in a sheltered location recommended.
WARNING
- A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Features
•
Advanced Sony EXview™ II image sensor
•
Video image processor delivers up to 700TV lines of resolution
•
Night vision range up to 120ft (37m) / 180ft (55m)*
•
ClearNight imaging technology ensures clear night vision and
improves recording efficiency up to 30%
•
6mm lens captures farther away objects (53° FOV)**
•
Split glass design minimizes IR reflection
•
Weatherproof (IP66) rated aluminum housing for indoor/outdoor
installations***
Disclaimers:
* Stated IR illumination range is based on ideal conditions in total darkness and in typical outdoor
night time ambient lighting. Actual range and image clarity depends on installation location,
viewing area and light reflection / absorption level of object.
** Field of View, Diagonal
*** Not intended for submersion in water. Installation in a sheltered location recommended.
Warning/Caution
•
Read this guide carefully and keep it for future reference
•
Follow all instructions for safe use of the product and handle
with care
•
Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
•
Do not disassemble the camera
•
Do not point the camera directly towards the sun or a source of
intense light
•
Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
•
Periodic cleaning may be required. Use a damp cloth only. Do
not use harsh cleaners or aerosol cleaners
•
The supplied extension cable is rated for surface mounting only
•
Cables for in-wall / floor-to-floor installations are sold separately
Installation Tips
•
This camera is not intended for ceiling mounting. If you
mount the camera to a ceiling, the camera will have to point
downwards for adequate clearance
•
Point the camera where there is the least amount of obstructions
(i.e. tree branches)
•
Install the camera in a location that is difficult for vandals to
reach
•
Secure cabling so that it is not exposed or easily cut
•
Camera rated for outdoor use. Installation in a sheltered location
recommended
SUPER+ RESOLUTION WEATHERPROOF
IR NIGHT VISION CAMERA
Quick Start Guide
English Version 1.0
LBC7051
86mm / 3.4”
Dimensions
80mm / 3.1”
