Chapter 11: Network settings
TruVision NVR 10 User Manual
73
2. Enter the required settings:
Option
Description
1. NIC Type
Network interface card (NIC) is a device used to connect the recorder to a
network. Select the NIC type used from the drop-down list.
Default value is 10/100M self-adaptive for the 4 channel recorder and
10/100/1000M self-adaptive for the 8 or 16 channel recorders.
2. Internal NIC IPv4
Address
Enter the internal NIC IPv4 address.
This is the IP address of the
recorder's internal network managing only the PoE port cameras. This is
not the LAN IP address.
Default value is 192.168.254.1.
3. Bridge PoE
Camera Network
Check this box to enable the Bridge PoE Camera Network.
Default value is Enable.
4. Enable DHCP
DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning
an IP address dynamically to a device each time it connects to a network.
Check this box if you have a DHCP server running and want your recorder
to automatically obtain an IP address and other network settings from that
server. The DHCP server is typically available in your router.
Default value is Disable.
5. IPv4 Address
Enter the IP address for the recorder. This is the LAN IP address of the
recorder.
Default value is 192.168.1.82.
6. IPv4 Subnet Mask Enter the subnet mask for your network so the recorder will be recognized
within the network.
Default value is 255.255.255.0.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......