Chapter 10: Camera setup
TruVision NVR 10 User Manual
67
5. Click
Apply
to save the settings and then click
Exit
to return to live view.
Configure PTZ settings
Use the
PTZ Setup
menu to configure IP cameras.
Ensure that the PTZ dome cameras are correctly connected to the RS-485 port on the
back panel.
Note:
If a camera does not work correctly after configuring the recorder, check the
parameters entered.
To configure PTZ dome camera settings:
1. Click the
PTZ Control
icon on the live view toolbar.
– Or –
From the menu toolbar, click
Camera Setup
>
PTZ Setup
.
2. Select the camera, baud rate, data bit, stop bit, parity, flow control, PTZ protocol and
address for the camera. See Appendix E “Default menu settings” on page 134 for
the default values.
Note:
It is important to ensure that the settings correspond with those used in the
PTZ camera.
3. Click
Copy
to copy the settings to another camera, if required, and select the
cameras.
4. Click
Apply
to save the settings and then click
Exit
to return to live view.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......