![background image](http://html1.mh-extra.com/html/interlogix/truvision-10/truvision-10_user-manual_2077070068.webp)
Chapter 10: Camera setup
68
TruVision NVR 10 User Manual
PTZ presets and tours
Presets are previously defined locations of an PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. They are configured and
modified from the Camera Setup > PTZ Presets/Tours window (see Figure 22 below).
Tours are series of presets. Shadow tours allow you to record the manual movement of
a PTZ and follow the same tour at a later date.
Note:
The PTZ dome camera used must be able to support a preset command.
Figure 22: PTZ configuration window
Table 13: Description of the PTZ configuration window
Name
Description
1.
Save preset
Saves preset.
2.
Call preset
Calls up pre-existing preset.
3.
Shadow tour toolbar
Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.
4.
Preset tour toolbar
Adds a step to a selected preset tour.
Starts the selected preset tour.
Stops the selected preset tour.
Deletes all the preset tour steps.
Scroll up the list.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......