Chapter 4: Operating instructions
TruVision NVR 10 User Manual
21
Name
Description
8.
Display buttons
See Table 3 below for a detailed description of all these buttons for
different tasks.
Display
: In multiview mode, toggle through the various multiviews
(full, quad, 1+5, 1+7, 9, and 16).
In HDD information mode and user management mode delete a
selected item. In PTZ mode, delete a selected key point. In Log
Search mode, display the details of a log file in Log Search result.
Seq
: In Live View mode, start/stop sequencing cameras on the
current monitor.
9.
Menu and Search buttons
Menu
: Enter/exit the main menu.
Search
: In live view, enter the advanced search menu.
10. Numeric buttons
Switch between different cameras in live, PTZ control or playback
modes.
Enter numerals 0 to 9 when using the virtual keyboard.
11. Status LEDs
HDD
: A steady GREEN light indicates that the NVR is accessing
the HDD in read or write operation. A steady RED light indicates
HDD failure.
Network
: A steady GREEN light indicates that the NVR is currently
connected to a network. No light indicates that the NVR is not
connected to any network.
Internal
: A steady GREEN light indicates that the NVR is currently
recording video/audio. A steady RED light indicates internal health
failure.
Alarm
: A steady RED light indicates that there is a sensor Alarm In.
A steady GREEN light indicates no alarm.
Table 3: Front panel button functions by task
Task
Button
Button function
Live view mode
Direction
Press to cycle through channels.
Enter
Press to show the PTZ control toolbar.
Reverse
Press to play the earliest video file of the current camera (upper-
left video tile if in multiview mode).
Pause
Press to freeze the last image of the live display for all active
cameras displayed.
Play
Press to play 24-hour playback of the current camera (upper-left
video tile if in multiview mode).
Live
Press to switch to live view mode.
Seq
Press to start/stop sequencing cameras on the current monitor.
Hold the Seq button for three seconds to start and stop
sequencing.
Menu
Press to enter the main menu.
Playback mode
Direction
The left and right buttons are used to speed up and slow down
recorded video. The up and down buttons are used to jump
recorded video forwards or backwards by 30 s.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......