Chapter 11: Network settings
80
TruVision NVR 10 User Manual
2. From the menu toolbar, click
Network Settings
>
UPnP
.
3. Check the
Enable UPnP
box.
4. From
Mapped Type,
select Auto or Manual.
If
Manual
is selected, enter the external ports and IP addresses required. Click the
Edit
icon
to change the values.
5. Click
Apply
to save the settings and click
Exit
to return to live view.
Network status
You can easily check network traffic in order to obtain information about the recorder
such as its linking status, MAC address, MTU, sending/receiving rate, and NIC type.
The Network Detection window shows the network traffic between the recorder and
your local network. However, the traffic between the plug and play cameras and the
NVR 10 is not shown.
You can also check the network connection status by testing its delay and packet loss.
To check network traffic:
1. From the menu toolbar, click
Network Settings
>
Net Detect.
The Traffic window
appears. The information displayed is refreshed once a second.
To check network delay and packet loss:
1. From the menu toolbar, click
Network Settings
>
Net Detect
.
2. Under the section “Network Delay, Packet Loss Test”, select the NIC to use and
enter the destination address. Click
Test
.
The test result appears in a pop-up window.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......