![background image](http://html1.mh-extra.com/html/interlogix/truvision-10/truvision-10_user-manual_2077070123.webp)
Chapter 18: Using the web browser
TruVision NVR 10 User Manual
123
Figure 33: Remote browser configuration window (System Information window shown)
Table 18: Description of remote configuration menus
Menu
Function
Description
Camera Setup
Camera Recording
Settings
Define the general camera settings such as camera name,
stream record mode, resolution, frame rate, audio recording,
and pre and post event times. See “Camera recording
settings” on page 57 for more information.
Snapshots
Define the image quality of snapshots. See “Snapshots” on
page 60 for further information.
Camera OSD
Define which information is displayed on-screen. See
“Camera OSD” on page 60 for further information.
Motion Detection
Define motion detection parameters. See “Motion detection”
on page 62 for more information.
Privacy Mask
Define the on-screen privacy mask areas. See “Privacy
mask” on page 64 for more information.
Camera Tamper
Define the video tampering detection settings. See “Camera
tamper” on page 65 for more information.
Restricted Access
Camera
Define the cameras whose images cannot be displayed by
those not logged in. See “Restricted access camera” on
page 65 for more information.
VCA
You can define an area on screen to enable a VCA alarm.
PTZ Preset/Tours
Define and select PTZ Presets and Tours.SD
Network Settings
Network Settings
Define the general network settings. See “Network settings”
on page 72 for more information.
PPPoE
Define the PPPoE settings. See “PPPoE settings” on page
74 for more information.
DDNS
Define the DDNS settings. See “DDNS settings” on page 75
for more information.
NTP
Define the NTP server settings. See ““NTP server settings”
on page 76 for more information.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......