Chapter 15: Storage management
TruVision NVR 10 User Manual
101
Note
: Once set to read-only, the HDD cannot be used to save recorded files until it
is set back to read/write (R/W). If the HDD that is currently being written to is set to
read-only, the data is then recorded to the next HDD. If there is only one HDD
present, setting it to read-only means the recorder cannot record.
Set up HDD sleep mode
You can set the HDD to enter standby mode, or sleep mode, after a period of inactivity.
Sleep mode decreases the power consumption of a HDD.
To enable HDD sleep mode:
1. From the menu toolbar, click
Storage Management
>
Storage Mode
.
2. Check Enable
HDD Sleeping
to enable sleep mode. Default is Enable.
3. Click
Apply
to save the settings.
4. Continue to configure the recorder or click
Exit
to return to live view.
S.M.A.R.T. settings
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) reports on a variety of
hard drive attributes. It helps ensure that the HDD is functioning properly at all times
while protecting video stored on the hard drive.
To view the S.M.A.R.T. information of a HDD:
1. From the menu toolbar, click
Storage Management
>
S.M.A.R.T. Settings.
2. Select the HDD whose data you want to see. A detail listing of S.M.A.R.T.
information is displayed.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......