![background image](http://html1.mh-extra.com/html/interlogix/truvision-10/truvision-10_user-manual_2077070060.webp)
Chapter 10: Camera setup
60
TruVision NVR 10 User Manual
To display the PoE power consumption information:
1. From the menu toolbar, click
Camera Management
>
Camera
>
PoE Setup
.
2. Select the PoE type required for each camera: No PoE, PoE-af, PoE-at, or 15.0 W.
3. Click
Apply
to save the settings and then click
Back
to return to live view.
Snapshots
You can define the image quality and resolution of snapshots for each camera.
Snapshots can be taken at any time during live view or playback, or can be created
when an alarm occurs and sent by email or sent to an FTP server.
To configure snapshots:
1. From the menu toolbar, click
Camera Setup
>
Snapshots
.
2. Select the desired camera.
3. Select the snapshot resolution from the drop-down list.
Select QCIF, CIF, 4CIF, or Maximum. Maximum is the maximum available
resolution from the camera. For IP cameras, this is the resolution being recorded.
4. Select the snapshot quality from the drop-down list (low, medium or high).
5. Click
Apply
to save the settings.
6. To copy the settings to other cameras, click
Copy
and select the desired cameras.
Click
OK
.
7. Click
Exit
to return to live view.
Camera OSD
The recorder lets you configure which information is displayed on-screen for each
individual camera.
The on-screen display (OSD) settings appear in live view mode and include the camera
name, time and date. They are part of the image and are therefore also recorded.
Summary of Contents for TruVision 10
Page 1: ...TruVision NVR 10 User Manual P N 1072766 EN REV D ISS 13MAY15...
Page 153: ......