301
NS3503-16P-4C User Manual
Please press
Add New Rule
button to start setting PoE Schedule function. You have to set PoE
schedule to profile and then go back to PoE Port Configuration, and select “Schedule” mode from per
port “PoE Mode” option to enable you to indicate which schedule profile could be applied to the PoE port.
The page includes the following fields:
Object
Description
Profile
Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Week Day
Allows user to set week day for defining PoE function by enabling it on
the day.
Start Hour
Allows user to set what hour PoE function does by enabling it.
Start Min
Allows user to set what minute PoE function does by enabling it.
End Hour
Allows user to set what hour PoE function does by disabling it.
End Min
Allows user to set what minute PoE function does by disabling it.
Reboot Enable
Allows user to enable or disable the whole PoE port reboot by PoE
reboot schedule. Please note that if you want PoE schedule and PoE
reboot schedule to work at the same time, please use this function, and
don’t use Reboot Only function. This function offers administrator to
reboot PoE device at an indicated time if administrator has this kind of
requirement.
Reboot Only
Allows user to reboot PoE function by PoE reboot schedule. Please
note that if administrator enables this function, PoE schedule will not
set time to profile. This function is just for PoE port to reset at an
indicated time.
Reboot Hour
Allows user to set what hour PoE reboots. This function is only for PoE
reboot schedule.
Reboot Min
Allows user to set what minute PoE reboots. This function is only for
PoE reboot schedule.
Buttons
: Click to add new rule.
: Click to apply changes
: Check to delete the entry.