Home
/
Interlogix
/
NS3503-16P-4C
/
User Manual

Interlogix NS3503-16P-4C, User Manual, Page: 229 / 316

Share

Page: 229 / 316

Interlogix NS3503-16P-4C User Manual Download Page 229

227

NS3503-16P-4C User Manual

Object

Description

Port

Select port for this drop down list

Type

Specify ARP Inspection is enabled on which ports. Only when both Global
Mode and Port Mode on a given port are enabled, ARP Inspection is enabled
on this given port.

Default: All interfaces are untrusted.

Src-Mac Chk

Enable or disable to checks the source MAC address in the Ethernet header
against the sender MAC address in the ARP body. This check is performed on
both ARP requests and responses. When enabled, packets with different MAC
addresses are classified as invalid and are dropped.

Dst-Mac Chk

Enable or disable to checks the destination MAC address in the Ethernet
header against the target MAC address in ARP body. This check is performed
for ARP responses. When enabled, packets with different MAC addresses are
classified as invalid and are dropped.

IP Chk

Enable or disable to checks the source and destination IP addresses of ARP
packets. The all-zero, all-one or multicast IP addresses are considered invalid
and the corresponding packets are discarded.

IP Allow Zero

Enable or disable to checks all-zero IP addresses.

Buttons

: Click to apply changes.

Figure 4-9-55 DAI Port Setting Page Screenshot

The page includes the following fields:

Object

Description

Port

The switch port number of the logical port

Type

Display the current port type

Src-Mac Chk

Display the current Src-Mac Chk status

«
...
227
228
229
230
231
...
»

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Reviews:

No comments