manualshive.com logo in svg

Interlogix NS3503-16P-4C, User Manual

The Interlogix NS3503-16P-4C is a high-quality network switch designed for seamless connectivity. With its comprehensive features and advanced technology, this product ensures smooth operation and efficient networking. To get started quickly, download the Quick Installation Manual for free from manualshive.com, providing step-by-step instructions for hassle-free setup.

Share
Download
background image

NS3503-16P-4C User Manual 

102 

This provides a tunneling mechanism to connect remote costumer VLANs through a common MAN 

space without interfering with the VLAN tags. All tags use EtherType 

0x8100

 or 

0x88A8

, where 0x8100 

is used for customer tags and 0x88A8 are used for service provider tags. 

In cases where a given service VLAN only has two member ports on the switch, the learning can be 

disabled for the particular VLAN and can therefore rely on flooding as the forwarding mechanism 

between the two ports. This way, the MAC table requirements is reduced. 

Edit Interface Setting 

The Edit Interface Setting/Status screens in Figure 4-5-5 and Figure 4-5-6 appear. 

Figure 4-5-5 Edit Interface Setting Page Screenshot 

 

The page includes the following fields: 

 

Object 

Description 

Port Select

 

Select port number for this drop down list to set VLAN port setting. 

Interface VLAN Mode 

Set the port in access, trunk, hybrid and tunnel mode. 

- Trunk means the port allows traffic of multiple VLANs. 

- Access indicates the port belongs to one VLAN only. 

- Hybrid means the port allows the traffic of multi-VLANs to pass in tag or untag 
mode. 

- Tunnel configures IEEE 802.1Q tunneling for a downlink port to another 
device within the customer network. 

PVID 

Allows you to assign PVID to selected port.   

The PVID will be inserted into all untagged frames entering the ingress port. 
The PVID must be the same as the VLAN ID that the port belongs to VLAN 
group, or the untagged traffic will be dropped. 

The range for the PVID is 1-4094. 

Accepted Type 

Determines whether the port accepts all frames or only tagged frames. This 
parameter affects VLAN ingress processing. If the port only accepts tagged 
frames, untagged frames received on the port are discarded.   

Options:   

- All 

- Tag Only 

- Untag Only 

By default, the field is set to All. 

Ingress Filtering 

If ingress filtering is enabled (checkbox is checked), frames classified to a 
VLAN that the port is not a member of get discarded. 

If ingress filtering is disabled, frames classified to a VLAN that the port is not a 
member of are accepted and forwarded to the switch engine.   

However, the port will never transmit frames classified to VLANs that it is not a 
member of. 

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Reviews:

No comments

Related manuals for NS3503-16P-4C

IBM 8237 Installation And User Manual preview
8237
Brand: IBM Pages: 166
Magnetrol B75 Installation And Operating Manual preview
B75
Brand: Magnetrol Pages: 28
3Com OfficeConnect 5 Datasheet preview
OfficeConnect 5
Brand: 3Com Pages: 2
3Com OfficeConnect 3C1670500C User Manual preview
OfficeConnect 3C1670500C
Brand: 3Com Pages: 18
Generac Power Systems GenReady Series 005448-2 Overview preview
GenReady Series 005448-2
Brand: Generac Power Systems Pages: 4
G&D DL-DVI-MUX2-NT SERIES Installation And Operation Manual preview
DL-DVI-MUX2-NT SERIES
Brand: G&D Pages: 76
Dexon DIMAX404 User Manual preview
DIMAX404
Brand: Dexon Pages: 31
J-Tech Digital JTECH-HD4X48 User Manual preview
JTECH-HD4X48
Brand: J-Tech Digital Pages: 28
Generac Power Systems 004635-3 Owner'S Manual preview
004635-3
Brand: Generac Power Systems Pages: 20
Eaton AGswitch Instructions Manual preview
AGswitch
Brand: Eaton Pages: 36
Gefen EXT-UHDA-HBTL-RX User Manual preview
EXT-UHDA-HBTL-RX
Brand: Gefen Pages: 33
3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch Getting Started Manual preview
3CB9E7 - CoreBuilder 9000 Chassis Switch
Brand: 3Com Pages: 132
KYLAND SICOM3432G Series Hardware Installation Manual preview
SICOM3432G Series
Brand: KYLAND Pages: 29
TekTone Tek-CARE NC554/8 Installation Instructions preview
Tek-CARE NC554/8
Brand: TekTone Pages: 2
C&C TECHNIC AVlink VAX-8404F User Manual preview
AVlink VAX-8404F
Brand: C&C TECHNIC Pages: 2
M-E CUVEO CT-W2 Manual preview
CUVEO CT-W2
Brand: M-E Pages: 36
Kramer VP-26 User Manual preview
VP-26
Brand: Kramer Pages: 46
Blue Sea Systems 8689 Manual preview
8689
Brand: Blue Sea Systems Pages: 2

Brands by name

Popular brands

Load more brands