Interlogix NS3503-16P-4C User Manual Download Page 166

Page: 166 / 316

NS3503-16P-4C User Manual

164



Each profile has only one access mode; either

permit

deny



When the access mode is set to

permit

, multicast join reports are processed when a multicast group

falls within the controlled range.



When the access mode is set to

deny

, multicast join reports are only processed when the multicast

group is not in the controlled range.

4.7.7.1 Multicast Profile Setting

The Add Profile and Profile Status screens in Figure 4-7-36 and Figure 4-7-37 appear.

Figure 4-7-36 Add Profile Setting Page Screenshot

The page includes the following fields:

Object

Description

IP Type

Select IPv4 or IPv6 for this drop down list

Profile Index

Indicates the ID of this particular profile

Group from

Specifies multicast groups to include in the profile. Specify a multicast group
range by entering a start IP address.

Group to

Specifies multicast groups to include in the profile. Specify a multicast group
range by entering an end IP address.

Action

Sets the access mode of the profile; either permit or deny.

- Permit

Multicast join reports are processed when a multicast group
falls within the controlled range.

- Deny

When the access mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled
range.

Buttons

: Click to add multicast profile entry.

Summary of Contents for NS3503-16P-4C





























































































































































































































































































































Search results

Summary of Contents for NS3503-16P-4C

Reviews:

Interlogix NS3503-16P-4C, User Manual, Page: 166 / 316

Search results

Summary of Contents for NS3503-16P-4C

Reviews: