![background image](http://html.mh-extra.com/html/interlogix/cdc4/cdc4_installation-and-programming-manual_2076792053.webp)
Chapter 2: System functions
CDC4 Door Controller Installation and Programming Manual
47
Figure 22: Extended mode
(1) Configuration software
(2) Management software
(3) Ethernet
(4) CDC4 Door Controller
(5) Advisor Advanced control panel
(6) RS485 data bus
(A) Hardware/Door configuration
(B) User credentials and user groups
configuration
(C) Intrusion events
(D) Access events
In this mode, management software downloads users, door groups, etc. directly
to CDC4, allowing CDC4 to utilise its maximum capacities, as shown in Table 6
on page 45. CDC4 retains its own database of users, door groups etc. from the
Advisor Advanced panel.
The number of users that can exercise alarm control from CDC4 is limited by the
user capacity of the Advisor Advanced panel. See the “Alarm control” section on
page 59 for more information.
Access events are sent directly via IP to management software, while alarms and
CDC4 status are sent to the Advisor Advanced panel.
Note that hardware configuration can only be made by the configuration software
connected to the Advisor Advanced control panel.
Notes
• CDC4 will still be fully functional if it is disconnected from management
software.
• Inputs will only register alarms in the Advisor Advanced panel if they are
mapped to Advisor Advanced inputs. See the “Input and output mapping”
section on page 66 for information on Advisor Advanced input mapping.
(4)
CDC4
(5)
ATS
(1)
ATS8500
(2)
ATS8600
(3)
(A)
(B)
(C)
(D)
(6)
(3)
(3)
Summary of Contents for CDC4
Page 1: ...CDC4 Door Controller Installation and Programming Manual P N 466 5478 REV D ISS 29OCT19 ...
Page 86: ...Chapter 3 Programming 80 CDC4 Door Controller Installation and Programming Manual ...
Page 120: ...Chapter 4 Menu reference 114 CDC4 Door Controller Installation and Programming Manual ...
Page 136: ...130 CDC4 Door Controller Installation and Programming Manual ...