180
Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
If the network name is unknown (not recognized by the GSM dialler), the network
code in square brackets is displayed instead of the name, for example,
“+ [20999]”.
9.3.n.5.2.3.0 Rescan nets
Scan in progress
Please wait
The Rescan nets command performs a GSM network scan.
The scan can take a few minutes. You can cancel the scan by pressing Clear.
9.3.n.5.2.3.m Select a network
1>Network name
MyGSM
Select a network to see more options.
9.3.n.5.2.3.m.1 Network name
1>Network name
MyGSM
The Network name is
the name of the GSM network. Refer to “1.2.8.6 Network
” on page 59 for more details.
9.3.n.5.2.3.m.2 Network code
2>Network code
21999
The Network code is
the unique code of the GSM network. Refer to “1.2.8.7
” on page 59 for more details.
9.3.n.5.2.3.m.3 Availability
3>Availability
Connected
The Availability values are
described in “9.3.n.5.2.3 Net.scanning” on page 179.
9.3.n.5.2.3.m.4 RSSI
4>RSSI
-35 dBm [IIII ]
The Received Signal Strength Indication (RSSI) value is diagnostic information.
See also
9.3.n.5.2.3.m.5 Use this net.
5>Use this net.
------------
Enter Use this network menu to connect the selected GSM network. This
replaces the network selected in “9.3.n.5.2.1 Net.selection” on page 179.