Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
165
9.1.n.5.m Select area
1 Area 1
> <
Set account numbers for each area.
9.1.n.6 Mode
6 Mode
>Primary CS<
The following modes are available for CS.
• Primary CS: The primary central station must unconditionally receive all
addressed events.
• Backup CS: The central station can be a backup CS for the previous CS in
the central s
tation list (see “9.1 Central station” on page 163). This means
that the panel reports to this central station only if the primary CS reporting
fails.
For example, if CS 1 and CS 2 are primary CS, and CS 3 and CS 4 are backup
CS, it means that CS 1 has no backup, CS 3 is a backup central station for CS 2,
and CS 4 is a backup for central station 3.
See “Alarm reporting principles” on page 206 for more information.
9.1.n.7 Retry count
7 Retry count
>1<
The Retry count value is the number of retries to make a successful call to the
central station. If the limit is reached, the FTC is generated.
The counter is zeroed when a new event occurs in Global FTC condition. See
“Failed to communicate (FTC)” on page 208 for more information.
The value ranges from 1 to 14. The default value is 1.
9.1.n.8 Protocol opt
1>(X)SIA
2 VOICE
It is possible to customize the communication protocol parameters using the
Protocol opt menu.
9.1.n.8.1 XSIA
1>Area modifier
Off
The XSIA menu allows you to set options for the SIA and XSIA protocol.