43
Commercial Burglary and Home Navigator System
Programming the Panel
Set Holiday A List
50008
Set Holiday B List
50009
Defaults = NA
Holiday lists allow you to set up time periods when regular sched-
ule hours vary. A holiday is defined as one day. A separate holi-
day must be added in order to span over consecutive days. Once
set up, users can incorporate holidays into schedules. Each parti-
tion/area has 2 lists (A and B) and each list has up to 8 holidays.
Document holidays in the User’s Guide.
To Add a Holiday:
1. Enter the installer code.
2. Enter the desired item number. The display shows
ENTER
PARTITION
/
AREA
NUMBER
OR
PRESS
*
TO
CANCEL
.
3. Enter the partition/area number (1–8) and press #. The display
shows
ENTER
HOLIDAY
NUMBER
OR
PRESS
*
TO
CANCEL
.
4. Enter the desired holiday number (1–8) and press #. The panel
display shows
HOLIDAY
DATA
IS
CURRENT
DATA
.
5. Enter a 2-digit month (01-12), a 2-digit day (01–31), and
press #. For example, if the holiday fell on July 4, you would
enter
0704
.
6. The display shows the new holiday setting.
To Delete a Holiday:
1. Enter the installer code.
2. Enter the desired item number. The display shows
ENTER
PARTITION
/
AREA
NUMBER
OR
PRESS
*
TO
CANCEL
.
3. Enter the partition/area number (1–8) and press #. The display
shows
ENTER
HOLIDAY
NUMBER
OR
PRESS
*
TO
CANCEL
.
4. Enter the desired holiday number (1–8) and press #. The panel
display shows
HOLIDAY
DATA
IS
current data
.
5. Enter 0 + #. The display shows
HOLIDAY
DATA
IS
NO
DATA
.
Set Event Configuration and Alarm Masks
50010
Defaults = NA
This setting allows you to specify how you want events reported.
Note
Whenever possible, use Advent Downloader to set con-
figuration masks.
Event masks are represented by an eight-digit event mask number
where 0 = off and 1 = on. For example, if an event mask reported
to phone 1, phone 2, history buffer, and was high priority, it would
be represented as “11010001” (see event mask formats below). If
you wanted the same event mask to stop reporting to phone 2, you
would change the event mask number to “10010001.” Notice how
the place holder for phone 2 was changed from a 1 (on) to a 0
(off). (From 11010001 to 10010001).
Event Mask Formats:
1—Reporting Phone 1
5—Pager
2—Reporting Phone 2
6—Report to Backup
3—Print
7—(not used)
4—History Buffer (Store)
8—High Priority
To Set a Configuration Mask:
1. Enter
50010
. The display shows
ENTER
EVENT
GENERAL
TYPE
OR
PRESS
*
TO
CANCEL
.
2. Enter the event general type (1–19) using Table B8 on
page 97, then press #. The display shows
ENTER
EVENT
SPECIFIC
TYPE
OR
PRESS
*
TO
CANCEL
.
3. Enter the event specific type using Table B8, and press #. The
display shows
ENTER
PARTITION
NUMBER
OR
PRESS
*
TO
CANCEL
.
4. Enter the desired partition/area (1–8) and press #. The display
shows the eight-digit event mask, then
ENTER
NEW
EVENT
MASK
OR
PRESS
#
TO
ACCEPT
.
5. Enter the desired 8-digit event mask (0 = off, 1 = on, and
2 = unchanged), then press #.
Alarm Event Formats:
1—Not Used
5—(leave at default)
2—Not Abortable
6—(leave at default)
3—Reporting Delay (part 1)*
7—(leave at default)
4—Reporting Delay (part 2)*
8—(leave at default)
Reporting Delay Formats:
00 = Immediate, 01 = Fire delay, 10 = Panic delay, 11 = Standard
delay.
To Set an Alarm Event:
1. Enter
50010
. The display shows
ENTER
EVENT
GENERAL
TYPE
OR
PRESS
*
TO
CANCEL
.
2. Enter the event general type (0) and then press #. The display
shows
ENTER
EVENT
SPECIFIC
TYPE
OR
PRESS
*
TO
CANCEL
.
3. Enter the alarm specific type using Table B8, and press #. The
display shows
ENTER
PARTITION
NUMBER
OR
PRESS
*
TO
CANCEL
.
4. Enter the desired partition/area (1–8) and press #. The display
shows the eight-digit event mask, then
ENTER
NEW
EVENT
MASK
OR
PRESS
#
TO
ACCEPT
.
5. Enter the desired 8-digit event mask (0 = off, 1 = on, and
2 = unchanged), then press #.
Print Zone & Device Information
50012
Default = NA
Sends programmed zone and device information to the printer.
To Print Zone and Device Information:
Enter
50012
. Zone and Device information will print.
Summary of Contents for Advent
Page 104: ......