35
Incorrect number of processors displays
Reason
Solution
Faulty VRM, or VRM not fully seated into its
socket.
Use the System Control and Status Panel to
determine the problem sockets.
Faulty CPU is installed.
Use the System Control and Status Panel to
determine the problem CPU.
Total amount of memory does not display
Reason
Solution
Faulty SIMMs or SIMMs not fully seated
into sockets.
Use the System Control and Status Panel to
determine the problem sockets. Reseat or
replace SIMMs.
SIMMs not properly installed according to
defined interleave restrictions.
Ensure the proper number of SIMMs are
installed to achieve valid interleaving. Add
or remove SIMMs as necessary.
More than one memory density of SIMM is
installed.
Replace SIMMs so that all SIMMs are of the
same memory density.
DMA bus timeout message displays
Reason
Solution
Failure in DMA bus logic has occurred.
Call the Customer Response Center.
Video Errors
System powered on, but screen remains blank
Reason
Solution
Graphics card disconnected from riser card
socket.
Open base unit and re-seat graphics card.
Refer to the System Reference.
Selected resolution is not supported by the
monitor.
Select a supported resolution. Refer to the
RealiZm documentation and
README
.
TXT
file
for resolution details.
Improper graphics driver installed.
Remove the driver and install a valid driver.
Refer to Chapter 2.
