19
The floppy disk drive B parameter is preset to Not Installed, unless an optional drive has been
installed before shipment. Do not change the parameter unless you install an optional floppy
disk drive.
To change the floppy drive parameters:
1. Select the Floppy A or Floppy B icon.
2. Press the up and down arrow keys or click in a box to select the correct parameter for the
floppy disk drive.
3. Press
ENTER
to accept the change, or click on the close icon in the upper left corner of the
floppy disk drive configuration menu.
Master Disk, Slave Disk
The Master Disk and Slave Disk icons represent parameters for Integrated Device Electronic
(IDE) drives. If installing IDE hard drives, use the Detect Master and Detect Slave utilities to
automatically detect and configure the drives. Refer to “Utility Menu” for more information.
To change the IDE drive parameters:
1. Select Master Disk or Slave Disk.
2. Select USER from the list of drive types.
3. Select each of the following parameters and enter the appropriate values. For more
information, refer to the documentation included with the device.
CYL
Cylinders
HD
Heads
WP
Write Precompensation
LZ
Landing Zone
SEC
Sectors
4. When complete, press
ESC
or click the close box at the upper left corner of the window.
