18
u
To change a parameter’s value, move the pointer to a parameter and click the mouse
button. An Options menu displays allowing you to select one of the choices.
u
When you are at the main menu in AMIBIOS Setup, press
ESC
to exit. If the Save
Changes and Exit option is highlighted, press
ENTER
to exit and any changes you made
while in the program will be saved. If you select the Continue option, then you will return
to AMIBIOS Setup.
u
You can set a password to prevent unauthorized users from accessing AMIBIOS Setup.
Refer to the section, “Security Menu,” later in this chapter for instructions.
Setup Menu
The Setup menu allows you to change most of the BIOS settings. This section describes the
parameters grouped in the AMIBIOS Setup menu.
Standard
Standard allows you to set the system date and time, and define floppy disk drive parameters.
Date/Time
Select the Date/Time icon to display the current system date and time values.
To change the system date and time:
1. Click on the incorrect value with the mouse pointer or press the
TAB
key until the value
highlights.
2. Click on the + or - buttons to change the value, or enter the correct value from the
keyboard.
NOTE
The time displays in 24-hour format.
3. Press
ESC
to save the new values and return to Standard Setup.
Floppy A, Floppy B
The Floppy A and Floppy B icons allow you to specify the type of floppy disk drive installed
in the system.
The floppy disk drive A parameter is preset to 1.44 MB 3.5-inch. Do not change the
parameter unless you replace floppy drive A with a different capacity disk drive.
