24
PCI IDE IRQ15 Connected to
When the PCI IDE Card Present In option is used to select a slot number, this parameter is
active. The options are Edge and Level. When activated, the default is Level.
Installed Memory Speed
StudioZ RenderRAX uses 60 ns memory SIMMs, so this parameter is set to 60 ns by default.
The other choice is 70 ns, which should not be used. The system will not boot if you set this
parameter to 70 ns.
Use ESCD for PCI IRQ Assignment
If this parameter is set to Yes, when the system boots, it reads ESCD data to determine how to
assign IRQs to system devices and option cards. You can use PnP operating systems to
manipulate this ESCD data to assign specific IRQs to specific system devices and option cards
on subsequent system boots. When the parameter is set to No (default), you can use the BIOS
to assign IRQs to PCI devices regardless of ESCD instructions.
PCI Slot x IRQ Priority
Use these parameters to assign specific IRQs to specific PCI cards when ESCD data is not
being used.
DMA Channel x Usage
These parameters specify whether a given DMA channel is to be reserved for an ISA card, or
is free to be assigned to another device by the PnP BIOS. The options are PnP (default) and
ISA.
IRQ x Usage
These parameters specify whether a given IRQ is to be reserved for an ISA card, or is free to
be assigned to another device by the PnP BIOS. The options are PCI/PnP (default) and ISA.
