Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 99 / 234

Intel
®
Server System SR2600UR/SR2625UR Service Guide 79
5. Make sure the interposer board fits onto alignment pin on device tray (see letter
“A” in Figure 65 ) and attach to the tray with screw (see letter “B” in Figure 65 ).
Figure 65. Securing the Interposer Board to the Device Tray
6. Insert the optical device tray assembly into the server system (see letter “A” in
Figure 66 ).
7. Make sure that the back end of the interposer board plugs into the matching socket
on the backplane (see letter “B” in Figure 66 ).
8. Verify that the blue release lever on the tray locks into place.
9. (Optional) For installing the optional USB floppy drive, note the location of the
backplane USB connector (see letter “C” in Figure 66 ) and refer to the
documentation that came with the device.
Figure 66. Installing an Optical Drive Assembly into the Server System
B
Tray alignment pin
fits into this hole.
A
AF002964
Opt
ical Drive
Tray
Assembly
Backplane
Release Lever
Interposer Board
USB
Connector
A
B
AF002965