Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 96 / 234

76 Intel
®
Server System SR2600UR/SR2625UR Service Guide
Figure 61. Installing Hard Drive into Carrier
8. With the black lever held in the fully open position, slide the hard disk assembly
into the server system and push all the way until it clicks (see letter “A” in
Figure 62 ).
9. Close the lever to lock the drive assembly into place (see letter “B” in Figure 62 ).
Figure 62. Installing Drive Assemby into the Server System
Removing a Hot-swap SAS/SATA Hard Disk Drive
To remove a hot-swap SAS/SATA hard disk drive from Intel
®
Server System SR2625UR,
follow these steps:
1. Press in on the green latch at the front of the hard drive carrier.
2. Pull out on the black lever to slide the carrier out from the server system.
3. Remove the four screws that attach the hard drive to the drive carrier. Lift the drive
from the carrier and store the drive in an anti-static bag.
AF002988
A
B
A
B
AF002989