Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 108 / 234

88 Intel
®
Server System SR2600UR/SR2625UR Service Guide
3. Slide the sixth HDD bracket into the backplane as shown in Figure 78 .
Figure 78. Installing Sixth HDD Bracket
The sixth hard disk drive kit comes with a power cable and two SATA cables.
Cabling for the sixth hard drive varies depending on which midplane you have in
your system.
4. Depending on the midplane installed in your system, do one of the following:
If you have an active midplane in your system, do the following:
a. Install one end of the power cable to the power connector on the backplane and
the opposite end to the power connector on the sixth HDD board (see letter “A”
in Figure 79 ).
b. Install one end of the short SATA cable to the SATA connector on the backplane.
c. Install the other end of the short SATA cable to the SATA connector on the sixth
HDD board (see letter “B” in Figure 79 ).
AF003034