Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 128 / 234

108 Intel
®
Server System SR2600UR/SR2625UR Service Guide
2. Remove all hot-swap drive carriers, regardless of whether or not a drive is installed
in the carrier. For instructions, see “Removing a SAS or SATA Hot-swap Hard Disk
Drive” on page 74 .
3. Disconnect all cables from the backplane.
4. Depending on your server system, do one of the following:
For Intel
®
Server System SR2600UR, do the following:
— Firmly grasp the top of the backplane and remove the backplane from the server
system by pulling straight up as shown in Figure 101 .
Figure 101. Removing the Backplane from the Intel
®
Server System SR2600UR
For Intel
®
Server System SR2625UR, do the following:
a. Remove the blue thumbscrew from the backplane board (see letter “A” in
Figure 102 ).
b. Hold the backplane board only by the edges and slide the backplane board in the
direction shown to release it (see letter “B” in Figure 102 ).
c. Remove the backplane board from the six hooks and pull out of the system (see
letter “C” in Figure 102 ).
AF002992