background image

 

Intel

® 

Server System SR1630GP / SR1630HGP Service Guide

129

For proper cooling and airflow, operate the chassis only with the chassis covers installed.  

Operating the chassis without the covers in place can damage chassis parts. To install the 

covers:

Check first to make sure you have not left loose tools or parts inside the chassis

Check that cables, add-in boards, and other components are properly installed.

Attach the covers to the chassis according to the product instructions.

Laser Peripherals or Devices

Caution:

To avoid risk of radiation exposure and/or personal injury:

Do not open the enclosure of any laser peripheral or device

Laser peripherals or devices have are not user serviceable

Return to manufacturer for servicing

Deutsch

Sicherheitshinweise für den Server

Das vorliegende Dokument bezieht sich auf 

Intel

®

Serverplatinen, 

Intel

®

Servergehäuse 

(Standfuß und Rack) sowie installierte Peripheriegeräte.  Es enthält Warnungen und 

Vorsichtsmaßnahmen zur Vermeidung von Gefahren durch Verletzung, Stromschlag, 

Feuer und Beschädigungen von Geräten. Lesen Sie diese Dokument daher sorgfältig, 

bevor Sie Ihr 

Intel

®

Serverprodukt installieren oder warten.  

Bei Widersprüchen zwischen den hier vorliegenden Angaben und den Informationen im 

Lieferumfang des Produkts oder auf der Website des betreffenden Produkts hat die 

Produktdokumentation Vorrang.

Die Integration und Wartung des Servers darf nur durch technisch qualifizierte Personen 

erfolgen.

Um die Einhaltung der vorhandenen Zulassungen und Genehmigungen für das Produkt zu 

gewährleisten, sind die Richtlinien in diesem Handbuch sowie die Montageanleitungen in 

den Serverhandbüchern zu beachten.  Verwenden Sie nur die beschriebenen, zugelassenen 

Komponenten, die im vorliegenden Handbuch angegeben werden.  Die Verwendung 

anderer Produkte oder Komponenten führt zum Erlöschen der UL-Zulassung und anderer 

Genehmigungen für das Produkt. Dadurch kann das Produkt gegen Produktbestimmungen 

verstoßen, die im Verkaufsland gelten.

Summary of Contents for SR1630GP - Server System - 0 MB RAM





































































































































































































Reviews: