Intel SR1630GP - Server System - 0 MB RAM Service Manual Download Page 10

Page: 10 / 196

Intel

Server System SR1630GP/SR1630HGP Service Guide

Server System References

If you need more information about this product or information about the accessories that

you can use with this server chassis, use the following resources.

For this Information or

Software

Use this Document or Software

Technical information
about the server chassis,
including sub-system
overviews and
mechanical drawings

Intel

Server System SR1630GP/SR1630HGP Technical Product

Specification

http://support.intel.com/support/motherboards/server/S3420GP/

Intel

Server Board S3420GP Technical Product Specification

http://support.intel.com/support/motherboards/server/S3420GP/

If you just received this
product and need to
install it

Intel

Server System SR1630GP/SR1630HGP Quick Start User's

Guide in the product box.

Accessories or other Intel
server products

Spares/Parts List & Configuration Guide

This is available from your Intel field representative or on the Server
Configurator Tool at:

http://www.intel.com/support/motherboards/server/s3420gp/
howto.htm

Hardware (peripheral
boards, adapter cards)
and operating systems
that have been tested with
this product

For the Tested Hardware Operating Systems List, you can go to the
Intel

Server Configurator Tool:

http://serverconfigurator.intel.com/default.aspx

Processors that have
been tested with this
product

Supported processors can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

DIMMs that have been
tested with this product

Supported memory can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

To make sure your system
falls within the allowed
power budget

Power Budget Tool

http://support.intel.com/support/motherboards/server/S3420GP/

For software to manage
your Intel

server

Intel

System Management

http://support.intel.com/support/motherboards/server/S3420GP/

For drivers

Driver (for an extensive list of drivers available)

Operating System Driver (for operating system drivers)

http://support.intel.com/support/motherboards/server/S3420GP/

For firmware and BIOS
updates

Firmware can be found at:

http://support.intel.com/support/motherboards/server/S3420GP/

Summary of Contents for SR1630GP - Server System - 0 MB RAM





































































































































































































Search results

Summary of Contents for SR1630GP - Server System - 0 MB RAM

Reviews:

Related manuals for SR1630GP - Server System - 0 MB RAM

Brands by name

Popular brands

Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Search results

Summary of Contents for SR1630GP - Server System - 0 MB RAM

Reviews:

Related manuals for SR1630GP - Server System - 0 MB RAM

Brands by name

Popular brands