Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 117 / 196

Intel
®
Server System SR1630GP / SR1630HGP Service Guide 95
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. If it is installed, remove the front bezel. For instructions, see
“Removing the Front
Bezel” on page 28 .
4. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in Figure 78.
Figure 78. Removing the Rack Handle
5. Repeat Step 4 on the opposite side of the system.
6. (Optional) Install the front bezel, if desired. For instructions, see
“Installing the
Front Bezel” on page 29 .
7. Plug all peripheral devices and the AC power cable into the server.
AF001204