Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 81 / 196

Intel
®
Server System SR1630GP / SR1630HGP Service Guide 59
7. Slide the optical drive assembly in through the front of the chassis (see letter “A” in
Figure 47).
8. Install the screws to lock the drive in place (see letters “B” and “C” in Figure 47).
Figure 47. Installing the Optical Drive into the System
9. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”
on page 29 .
10. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
Removing a Slimline Optical Drive (SR1630HGP)
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 30 .
4. If it is installed, remove the bezel. For instructions, see “Removing the Front
Bezel” on page 28 .
5. Remove the screws holding the drive in place (see letters “A” and “B” in Figure 48)
and slide the optical drive assembly out through the front of the chassis (see letter
“C” in Figure 48).
A
B
AF0016 3 6
C