Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 49 / 196

Intel
®
Server System SR1630GP / SR1630HGP Service Guide 27
3
Hardware Installations and
Upgrades
Caution: No components in the Intel
®
Server System SR1630GP are hot-swappable. Before
removing or installing any component in this server system, you must first take the server
out of service, turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplug the AC power cord from the system or wall
outlet.
Note: Some components in the Intel
®
Server System SR1630HGP are hot-swappable and are
noted as such (where applicable) in the following instructions.
Note: Most of the illustrations in this chapter show the Intel
®
Server System SR1630GP with an
optional optical drive installed. Unless otherwise noted, the instructions for removing and
installing components are the same for the Intel
®
Server System SR1630HGP. When
instructions differ, separate illustrations are shown for the Intel
®
Server System
SR1630HGP.
Before You Begin
Before working with your server product, pay close attention to the “Safety Information”
on page iii .
Tools and Supplies Needed
•
Phillips* (cross head) screwdriver, #1 bit and #2 bit
•
Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to the left, right, front, top, and bottom assume the reader is facing the front
of the server system as it would be positioned for normal operation.