Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 31 / 196

Intel
®
Server System SR1630GP / SR1630HGP Service Guide 9
Peripheral Devices (SR1630GP)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Hard Disk Drive Bay HDD0 (located under the slimline optical drive bay)
•
Hard Disk Drive Bay HDD1
Peripheral Devices (SR1630HGP)
The server system provides locations and hardware for installing hard drives, slimline
CD-ROM drive, or DVD-ROM drive. You must purchase the drives separately. Available
options include:
•
Slimline Optical Drive Bay
•
Three Hard Disk Drive Bays
Hard Disk Drives
The Intel
®
Server System SR1630GP/SR1630HGP provides six SATA ports. The six
SATA ports are near the front left side of the server board.
For instructions on installing hard drives, see “Installing and Removing a Hard Drive
(SR1630GP)” on page 44 .
Note: Each drive can consume up to 17 W of power. Drives must be specified to run at a
maximum ambient temperature of 45
°
C.
Note: The Intel
®
Server System SR1630GP / SR1630HGP does not support all Serial ATA
(SATA) hard drives. See “Server System References” on page x for an Internet link to a
list of supported hardware.