Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 175 / 196

Intel
®
Server System SR1630GP / SR1630HGP Service Guide 153
Appendix E: Regulatory and
Compliance Information
Product Regulatory Compliance
Warning: To ensure regulatory compliance, you must adhere to the assembly instructions in this
guide to ensure and maintain compliance with existing product certifications and
approvals. Use only the described, regulated components specified in this guide. Use of
other products/components will void the UL listing and other regulatory approvals of the
product and will most likely result in noncompliance with product regulations in the
region(s) in which the product is sold.
To help ensure EMC compliance with your local regional rules and regulations, before
computer integration, make sure that the server system, power supply, and other modules
have passed EMC testing using a server board with a microprocessor from the same
family (or higher) and operating at the same (or higher) speed as the microprocessor used
on this server board. The final configuration of your end system product may require
additional EMC compliance testing. For more information, please contact your local Intel
representative.
This is an FCC Class A device. Integration of it into a Class B system does not result in a
Class B device.
Product Safety Compliance
This server system product, when correctly integrated per this guide, complies with the
following safety and electromagnetic compatibility (EMC) regulations.
Intended Application
This product is to be evaluated and certified as Information Technology Equipment (ITE),
which may be installed in offices, schools, computer rooms, and similar commercial type
locations. The suitability of this product for other product certification categories and/or
environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm
systems, test equipment, etc.), other than an ITE application, will require further
evaluation and may require additional regulatory approvals.
Note: The use and/or integration of telecommunication devices such as modems and/or wireless
devices have not been planned for with respect to these systems. If there is any change of
plan to use such devices, then telecommunication type certifications will require
additional planning. If NEBS compliance is required for system level products, additional
certification planning and design will be required.