Intel
®
Server System R2000WT Product Family System Integration and Service Guide
60
3.11 2 x 2.5” Rear Mount Backplane Module Accessory Kit
Installation
Figure 77. 2 x 2.5" Rear Mount Backplane Module Installation
•
Remove the two fastener screws securing the bay cover plate to the chassis (see letter ‘A’)
•
Unlatch and remove the bay cover plate from the chassis (see letter ‘B’)
•
Carefully remove the backplane module from its packaging
•
Position the drive bay module over the power supply bay and slide back (see letter ‘C’)
•
Secure the drive bay module to the chassis using four fastener screws; two on the chassis sidewall, and
two on the chassis back panel. (see letter ‘D’)
Two 2.5”
SATA
Hot Swap
Drive Bay Option