Intel R2000WT, System Integration And Serive Manual

Page: 130 / 140

Intel® Server System R2000WT Product Family System Integration and Service Guide
114
BIOS POST Progress Codes
The following table provides a list of all POST progress codes.
Table 8. POST Progress Codes
Checkpoint
Diagnostic LED Decoder
Description
1 = LED On, 0 = LED Off
Upper Nibble
Lower Nibble
MSB LSB
8h 4h 2h 1h 8h 4h 2h 1h
LED # #7 #6 #5 #4 #3 #2 #1 #0
SEC Phase
01h
0 0 0 0 0 0 0 1 First POST code after CPU reset
02h 0 0 0 0 0 0 1 0 Microcode load begin
03h 0 0 0 0 0 0 1 1 CRAM initialization begin
04h 0 0 0 0 0 1 0 0 Pei Cache When Disabled
05h 0 0 0 0 0 1 0 1 SEC Core At Power On Begin.
06h 0 0 0 0 0 1 1 0 Early CPU initialization during Sec Phase.
07h 0 0 0 0 0 1 1 1 Early SB initialization during Sec Phase.
08h 0 0 0 0 1 0 0 0 Early NB initialization during Sec Phase.
09h 0 0 0 0 1 0 0 1 End Of Sec Phase.
0Eh 0 0 0 0 1 1 1 0 Microcode Not Found.
0Fh 0 0 0 0 1 1 1 1 Microcode Not Loaded.
PEI Phase
10h
0 0 0 1 0 0 0 0 PEI Core
11h 0 0 0 1 0 0 0 1 CPU PEIM
15h 0 0 0 1 0 1 0 1 NB PEIM
19h 0 0 0 1 1 0 0 1 SB PEIM
MRC Process Codes – MRC Progress Code Sequence is executed - See Table 55. MRC Progress Codes
PEI Phase continued…
31h
0 0 1 1 0 0 0 1 Memory Installed
32h 0 0 1 1 0 0 1 0 CPU PEIM (Cpu Init)
33h 0 0 1 1 0 0 1 1 CPU PEIM (Cache Init)
34h 0 0 1 1 0 1 0 0 CPU PEIM (BSP Select)
35h 0 0 1 1 0 1 0 1 CPU PEIM (AP Init)
36h 0 0 1 1 0 1 1 0 CPU PEIM (CPU SMM Init)
4Fh 0 1 0 0 1 1 1 1 Dxe IPL started
DXE Phase
60h
0 1 1 0 0 0 0 0 DXE Core started
61h 0 1 1 0 0 0 0 1 DXE NVRAM Init
62h 0 1 1 0 0 0 1 0 SB RUN Init
63h 0 1 1 0 0 0 1 1 Dxe CPU Init
68h 0 1 1 0 1 0 0 0 DXE PCI Host Bridge Init
69h 0 1 1 0 1 0 0 1 DXE NB Init
6Ah 0 1 1 0 1 0 1 0 DXE NB SMM Init
70h 0 1 1 1 0 0 0 0 DXE SB Init
71h 0 1 1 1 0 0 0 1 DXE SB SMM Init
72h 0 1 1 1 0 0 1 0 DXE SB devices Init