Intel
®
Server System R2000WT Product Family System Integration and Service Guide
30
2.5.2
Processor Installation
Caution:
The processor must be appropriate: You may damage the server board if you install a processor that
is inappropriate for your server. For a web link to the list of compatible processor(s), see “Additional
Information and Software” at the beginning of this document.
Caution:
ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage to the
processor by doing the following: (1) Touch the metal chassis before touching the processor or server board.
Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the
processor. (2) Avoid moving around unnecessarily.
Note:
The following illustrations to not show the black mylar spacer attached to the processor socket cover.
This was done for illustration clarity purposes only. The black mylar spacer does NOT need to be removed
from the processor socket cover to perform a processor installation procedure.
•
Unlatch the processor socket load plate
Figure 30. Processor Installation – Open the Socket Lever
Push the lever handle labeled “OPEN 1
st
” (see letter ‘A’) down and toward the processor socket. Rotate the
lever handle up. Reapeat the steps for the second lever handle (see letter ‘B’).
•
Lift open the Load Plate.
Figure 31. Processor Installation– Open the Load Plate
Rotate the right lever handle down until it releases the Load Plate (see letter ‘A’). While holding down the
lever handle, with your other hand, lift open the Load Plate (see letter ‘B’).
