Intel Extensible Firmware Interface Specification Download Page 99

Page: 99 / 494

Services

Version 1.02

12/12/00

Once

ExitBootServices()

is performed, variables that are only visible during boot services

will no longer be returned. To obtain the data contents or attribute for a variable returned by

GetNextVariableName(),

the

GetVariable()

interface is used.

Status Codes Returned

EFI_SUCCESS

The function completed successfully.

EFI_NOT_FOUND

The next variable was not found.

EFI_BUFFER_TOO_SMALL

The

VariableNameSize

is too small for the result.

VariableNameSize

has been updated with the size needed

to complete the request.

EFI_INVALID_PARAMETER

One of the parameters has an invalid value.

EFI_DEVICE_ERROR

The variable name could not be retrieved due to a hardware error.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands