Intel Extensible Firmware Interface Specification Download Page 267

Page: 267 / 494

PXE Base Code Protocol

Version 1.02

12/12/00

249

Status Codes Returned

EFI_SUCCESS

The PXE Base Code Protocol was started.

EFI_INVALID_PARAMETER

One of the parameters is not valid.

EFI_UNSUPPORTED

UseIpv6

TRUE

, but the

Ipv6Supported

field of the

EFI_BASE_CODE_MODE

structure is

FALSE

EFI_ALREADY_STARTED

The PXE Base Code Protocol is already in the started state.

EFI_DEVICE_ERROR

The network device encountered an error during this operation.

EFI_OUT_OF_RESOURCES

Could not allocate enough memory or other resources to start the
PXE Base Code Protocol.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands

Intel Extensible Firmware Interface, Specification

Search results

Summary of Contents for Extensible Firmware Interface

Reviews:

Brands by name

Popular brands