manualshive.com logo in svg

Intel Extensible Firmware Interface, Specification

Share
Download
Intel Extensible Firmware Interface Specification Download Page 311

SIMPLE_NETWORK Protocol

Version 1.02

12/12/00

293

15.1.9 EFI_SIMPLE_NETWO RK.MCastIPtoMAC()

Summary

Converts a multicast IP address to a multicast HW MAC address.

Prototype

EFI_STATUS

(EFIAPI *EFI_SIMPLE_NETWORK_MCAST_IP_TO_MAC) (

IN EFI_SIMPLE_NETWORK

*This,

IN BOOLEAN

IPv6,

IN EFI_IP_ADDRESS

*IP,

OUT EFI_MAC_ADDRESS

*MAC

);

Parameters

This

A pointer to the 

EFI_SIMPLE_NETWORK 

instance.

IPv6

Set to 

TRUE

 if the multicast IP address is IPv6 [RFC 2460].  Set

to 

FALSE

 if the multicast IP address is IPv4 [RFC 791].

IP

The multicast IP address that is to be converted to a multicast
HW MAC address.

MAC

The multicast HW MAC address that is to be generated from 

IP

.

Description

This function converts a multicast IP address to a multicast HW MAC address for all packet
transactions.  If the mapping is accepted, then 

EFI_SUCCESS

 will be returned.

Status Codes Returned

EFI_SUCCESS

The multicast IP address was mapped to the multicast HW MAC
address.

EFI_NOT_STARTED

The network interface has not been started.

EFI_INVALID_PARAMETER

One or more of the parameters has an unsupported value.

EFI_DEVICE_ERROR

The command could not be sent to the network interface.

EFI_UNSUPPORTED

This function is not supported by the network interface.

Summary of Contents for Extensible Firmware Interface















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands